Configuring Access Manager roles - Security Center 5.12

To monitor the units, keep them in sync with the access control settings in Security Center, and allow them to make access control decisions independently, you can configure an Access Manager to control the units.

1. From the Config Tool homepage, open the Access control task, and click the Roles and units view.
2. Select the Access Manager role to configure, and click Resources.
3. If necessary, configure the database required to run this Access Manager.
   If you plan on setting up Access Manager failover, see Setting up role failover.
4. Click Properties and configure the general settings of the Access Manager.
   Many of these settings only apply to Synergis units. A Synergis unit is an access control unit enrolled through the Synergis extension. This includes all supported units, except HID units.

   Keep events

   Specify how long you want to keep the events in the Access Manager database before deleting them. The access control events are used for reporting and maintenance purposes (they include events related to doors, elevators, areas, and other access control entities).

   Indefinitely

   Keep the events until you manually delete them.

   For

   Select the number of days for the retention period.

   CAUTION:

   If you’re using the SQL Server 2014 Express database engine (included with the Security Center installation files), the database size is limited to 10 GB. A door event uses (on average) 200 bytes in the database. If you configure the Access Manager to keep door events indefinitely, the database eventually reaches the 10 GB limit and the engine stops.

   Include identifiable personal data in synchronization

   Select this option to sync cardholder names with the Synergis units. If this option is cleared (default), only credentials without personal data are synced. Enable this option when you have devices that can display cardholder names and you want them to appear.

   Minimal cardholder synchronization

   Select this option to minimize the number of cardholders the Access Manager needs to synchronize with its units. This option is only recommended for large systems and requires following specific design guidelines. It is disabled by default.

   Manage offline doors

   TBD.

   Assign NTP server

   Turn this option on, and enter an NTP server in the Address field to configure the NTP server for all the access control units under this Access Manager role. This setting overrides the NTP server configured in the units' portals. To override this setting for a specific unit, you can configure a different NTP server from the unit's Properties page.

   NOTE: The following minimum firmware versions are required, depending on your access control units:

   • Synergis™ Softwire 11.4.0
   • Synergis™ Cloud Link 2.1.0
   • Cloud Link Roadrunner™ 2.1.0

5. If necessary, add the extensions for the access control unit types that you want this Access Manager to manage.
6. Add the access control units that you want this Access Manager role to manage.
   Do any of the following:
   • Enroll Axis Powered by Genetec units.
   • Enroll Cloud Link Roadrunner units.
   • Enroll Synergis Cloud Link units.
   • Enroll HID units
7. If you plan to create I/O zones that involve multiple Synergis units, or apply antipassback to areas controlled by multiple Synergis units, enable peer-to-peer.