To display cameras from the Genetec™ Web Player library in your independent web page,
it must be connected to a properly configured Media Gateway role.
Before you begin
Ensure the following conditions:
- The Media Gateway
role is created in your system.
- You should have your own web server to host the independent web page.
- You have a valid SDK certificate.
- The Genetec™ Server is using a valid
certificate, not self-signed, containing the server’s public address.
Procedure
-
From the Config Tool homepage, open the Video task and click the
Roles and units view.
-
In the entity tree, select the Media Gateway role, and click the
Properties tab.
-
In the HTTP section, enable the Use the default
secure HTTP port of the server setting to ensure that port 443 is available
to the Genetec Web Player.
-
Note the Web address entry.
It is required for integrating the player in your web page.
-
In the Video streaming section, select the desired
Default live stream setting.
-
Allow transcoding as needed.
NOTE: Transcoding is required for the use of the Mobile Server, the optimization of PTZ
camera latency, and for certain codecs.
-
Click Apply.
-
Click the Resources tab.
-
(Optional) Change the role’s primary
server.
-
(Optional) Add servers to the role to configure load distribution for the Media
Gateway.
-
Click Apply.