Deployment overview for your fixed AutoVu system - To integrate different ALPR capabilities to Security Center, you can deploy a fixed AutoVu™ system using SharpV cameras. - Security Center 5.12

Security Center Administrator Guide 5.12
Product
Security Center
Content type
Guides > Administrator guides
Version
5.12
ft:locale
en-US
Last updated
2025-03-31

To integrate different ALPR capabilities to Security Center, you can deploy a fixed AutoVu™ system using SharpV cameras.

The following steps describe a typical AutoVu deployment. Depending on your specific installation requirements, your process might be different.
Step Task Where to find more information

1

Install and configure the SharpV camera.
  • For more information, see the SharpV Installation Guide.
  • For more information, see the SharpV Administrator Guide.

2

Complete the pre-configuration steps.

3

Use the Admin account in Config Tool to connect to your system.

4

Configure the ALPR Manager server and database settings.

5

Configure the Archiver role in Security Center.

6

Add the SharpV camera to the ALPR Manager role so that Security Center can receive license plate reads.

7

(Optional) If you want to store video from the SharpV camera, add it to the Archiver role.

NOTE: The ALPR Manager always sends ALPR images to the Archiver for storage.

8

(Optional) Specify the SharpV location and time zone.

9

(Optional) Create and configure hotlist entities.

10

(Optional) If you are using license plates as credentials for access control, then configure the system to grant or deny access to a parking area or other facility.