PTZ widget - Security Center 5.12

The PTZ widget controls the pan, tilt, and zoom operations on the displayed camera. It appears in the Controls pane when the selected tile displays a PTZ-enabled camera.

IMPORTANT: If a PTZ button is grayed out, the PTZ camera () you’re working with doesn’t support that command.

Button or Letter	Command	Description
A	Direction arrows	Pan the PTZ motor using the eight direction arrows.
B	Speed slider	Adjust the speed of the PTZ motor.
C	Zoom in/out	Zoom in and out using the plus (+) and minus (-) commands.
D	Quick access buttons	Move the PTZ motor to one of the eight quick access PTZ presets.
E	Presets	Select a preset from the Presets list to move the PTZ motor to that preset, save a new preset position, or rename the preset.
F	Patterns	Select a PTZ pattern from the Patterns list to do one of the following: Start a PTZ pattern (series of presets or recorded PTZ movements. Record a new pattern. Rename the pattern.
G	Preset tours	Select an auxiliary from the Preset tours list to start or stop an auxiliary command, or rename the command.
	Lock PTZ	Lock the PTZ motor so only you have control of the PTZ.
	Toggle to advanced mode	Open the PTZ Advanced mode menu.
	Focus near	Focus the PTZ near.
	Focus far	Focus the PTZ far.
	Open iris	Manually control the iris (open iris).
	Close iris	Manually control the iris (close iris).
	PTZ home	Go to the PTZ home (default) position.
	Flip	Flip the PTZ motor 180 degrees.
	Menu on/off	Open the PTZ menu. This option is only for analog PTZ cameras.
	Specific commands	Use commands that are specific to that camera model.
	Go to preset	Jump to the preset position selected in the Go to preset list. Save Save the preset selected in the list, using the current PTZ position. Clear preset Clear the PTZ position from the preset.
	Start pattern	Start the PTZ pattern selected in the Start pattern list. You can click any preset of PTZ button to stop the pattern. Rename Rename the selected preset, pattern, or auxiliary. Record pattern Record a new PTZ pattern. Clear pattern Clear the pattern.
	Start auxiliary command	Start a PTZ auxiliary command (for example, a wiper blade).
	Stop auxiliary command	Stop the PTZ auxiliary command.
	Rename	Rename the selected preset tour. NOTE: The Rename feature for federated PTZ cameras is not active from a Federation™ host. Use the Remote configuration task to rename this element on a federated PTZ camera.