If you want hotlists and permit lists to be monitored by patrol vehicles, the lists must be activated and managed by at least one ALPR Manager.
What you should know
- The ALPR Manager sends the active hotlists and permit lists to the patrol vehicles it manages.
- The ALPR Manager matches the hotlists against the reads collected from Sharp cameras to produce hits.
- When you create a new hotlist or permit list, they are active for all ALPR Managers by default.
- Only patrol vehicles configured for parking enforcement require permits.
- You can associate permits to individual patrol vehicles. You can associate hotlists to individual patrol vehicles and Sharp units.
- Hotlist retention can be constrained by either the ALPR Manager configuration or the hotlist settings. The system warns you if there is a conflict between the two retention settings. For more information on the ALPR Manager Hit retention period setting, see Configuring the ALPR Manager role. For more information on the hotlist Expires after setting, see Configuring hotlist and permit attributes.
Procedure
- From the Config Tool homepage, click , and then click the ALPR Manager you want to configure.
- Click the Properties tab.
- Under File association, select the hotlists and permits you want the ALPR Manager to manage.
- Click Apply.