Supported HID Edge controllers - Security Center 5.12

Security Center Administrator Guide 5.12

Product
Security Center
Content type
Guides > Administrator guides
Version
5.12
Language
English
Last updated
2024-09-13

HID has two lines of Edge controllers: EVO (newer) and Legacy. The newer line of controllers can take an optional 2nd reader and have enhanced power efficiency (12 to 24 VDC), therefore, can support 12 V or 24 V locks.

In the following series of tables, we compare the characteristics of the EVO controllers to their Legacy counterparts. For more information, refer to HID documentation.

Edge platform differences between EVO and Legacy

Characteristics EVO Legacy
Flash memory 128 MB 8 MB
Maximum cardholder capacity 125,000 44,000
Offline cardholder capacity with Security Center1 65,0002 22,0002
Power over Ethernet (PoE) standard 802.3af 802.3af
RTC backup Super-cap (2-5 days)

No replacement required

Battery (3-5 days)

Requires replacement

Tamper Optical and external switch Mechanical and external switch
Door communication Discrete I/O, Wiegand, Hi-O Discrete I/O, Wiegand
Mounting holes and wiring termination US Single-Gang, EU/ASIA 60 mm US Single-Gang
Standby condition currrent 85 – 180 mA 1 A
Maximum current 1.5 A 1.5 A
Maximum combined output rating 1.2 A 700 mA
Operating temperature range 32 ° – 120 ° F ( 0 ° – 49 ° C) 32 ° – 120 ° F ( 0 ° – 49 ° C)
Humidity 5% to 85% non-condensing 5% to 85% non-condensing

1 In Security Center, a cardholder can have multiple credentials. A cardholder with two credentials is counted as two by HID.

2 With Security Center, the unit's cardholder capacity is lower than its maximum cardholder capacity. This is partly because extra memory is used as cache to allow unit synchronization to be performed without affecting normal operation.

Edge controller differences between EVO and Legacy

Characteristics EVO (EH400-K) Legacy (E400)
Lock power provided by controller 12 V or 24 V 12 V
Reader power provided by controller 12 V 12 V
Input power PoE, 12 V, 24 V PoE, 12 V
Device periphery power using PoE 340 mA @ 24 V 700 mA @ 12 V
I/O reading (2 Readers) Yes No
Inputs/Outputs 5 inputs & 2 outputs 5 inputs & 2 outputs

Edge reader/controller differences between EVO and Legacy

Characteristics EVO (EHR40-K, EHRP40-K) Legacy (ER40, ERP40)
Input power PoE, 12 V, 24 V PoE, 12 V
Device periphery power using PoE 310 mA @ 24 V 600 mA @ 12 V
13.56 MHz "Smart card" credential compatibility iCLASS iCLASS
125 kHz "Prox" credential compatibility HID Prox, Indala, EM4102, AWID HID Prox
Inputs/Outputs 5 inputs & 2 outputs 5 inputs & 2 outputs
Packaging: number of pieces to install 2 1
Only secure side access to lock output Yes No