Creating doors - When the doors and access control units are physically wired, you can create and configure the door entity in Config Tool. - Security Center 5.13

When the doors and access control units are physically wired, you can create and configure the door entity in Config Tool.

1. From the Config Tool homepage, open the Area view task.
2. Select the area where you want to add the door.
3. Click Add an entity () > Door.
4. In the Creating a door wizard, enter the door name and description.
5. From the Location list, select the area in which the door belongs, and click Next.
   You are moved to the Door information page.
6. From the Door type list, select Normal.
   For information on offline doors, see Creating offline doors.
7. Assign names to the door sides.
   In/Out, Secure/Non-secure, Entrance/Exit, East/West.
8. Associate the door with the access control unit it is wired to:
   1. From the Access control unit list, select a unit.
   2. From the Interface module list, select an interface module.
   3. (Optional) from the Door template list, select a template.
   NOTE: Security Center includes templates for most popular configurations; you can also create custom templates using the Security Center SDK.
9. Click Next.
10. Review the Summary page, and click Create > Close.
    The new door appears in the area view’s entity tree.
11. Select the door and click the Properties tab.
12. Configure the general access control behavior of the door.
13. Click Apply.
14. Describe the wiring between the access control unit and the door to Security Center.
15. Select who has access to the door.