Setting up redundant archiving - You can enable redundant archiving at the level of the Archiver role, the failover server, or individual cameras. - Security Center 5.13

You can enable redundant archiving at the level of the Archiver role, the failover server, or individual cameras.

To enable redundant archiving on the Archiver role level:

1. From the Config Tool homepage, open the Video task and click the Roles and units view.
2. Select the primary Archiver and click the Camera default setting tab.
3. Click Show advanced settings.
4. Turn on the Redundant archiving option.
5. Click Apply.

To enable redundant archiving on a per-server level:

1. From the Config Tool homepage, open the Video task and click the Roles and units view.
2. Select the primary Archiver and click the Camera default setting tab.
3. In the Per-server settings section, turn on the Custom settings per server option.
   A section appears with tabs for each server assigned to the Archiver role.
4. Open the failover server tab that you want to enable redundant archiving.
   
5. Turn on the Redundant archiving option.
6. Click Apply.

To enable redundant archiving on an individual camera level:

1. From the Config Tool homepage, open the Video task and click the Roles and units view.
2. Select the camera to configure and click the Recording tab.
3. In the Recording settings area, select Custom settings.
4. Turn on the Redundant archiving option.
5. Click Apply.