In the Extensions tab, you can configure the common connection parameters shared by the video units that are controlled by the selected Archiver. The extensions are automatically created when you add a unit to the Archiver.
- Transaction timeout
- Time that is spent waiting for a response before re-sending a command to the unit.
- Command port
- (Bosch only) Port used by the Archiver to send commands to the Bosch units. This field has default values that get reset every time the Protocol field is modified.
- (Bosch only) Transport protocol used by the Archiver to send commands to the Bosch
units.The accepted values are:
- Use RCP+ over TCP (default). The command port must be set to 1756.
- Use HTTP or HTTPS (RCP+ over CGI).IMPORTANT: To enroll a Bosch unit using either HTTP or HTTPS, you must manually create the Bosch extension, or modify an existing one.
NOTE: The command ports configured in the Bosch extension are default values. The values configured on the Bosch units might be different. The Discovery port must match the values configured on the Bosch units.
- To use HTTP, set Command port to match the value of HTTP browser port configured on the Bosch unit.
- To use HTTPS, set Use HTTPS to On under the Default logon group, and set Port to match the value of HTTPS browser port configured on the Bosch unit.
- RSTP port
- RTSP (Real Time Streaming Protocol) port used by the Archiver to request video from
the units that support this protocol.
The RTSP port is used to listen for RTSP (Real Time Streaming Protocol) requests. When multiple archiving roles are hosted on the same server, this value must be unique for each one. The configured value cannot be the same as any value used for the Media Router role, its redirector agent, or any Auxiliary Archiver hosted on the same server.
- VSIP port
- (Verint only) Port used for automatic discovery. All units that are controlled through the same Verint extension must be configured with the same VSIP port. All Verint extensions configured for the same Archiver must have different discovery ports.
- Refuse basic authentication
- Use this switch to enable and disable basic authentication for an extension. This is useful if you turned off basic authentication in the Security Center InstallShield, but need to turn it on again to use a camera that only supports basic authentication. To turn basic authentication on again, you must switch Refuse basic authentication to Off.
- Discovery port
- Automatic discovery port. If multiple instances of the same type of extension are
configured for the same Archiver, they must all use a different discovery port.
NOTE: If you decide to change the Discovery port after the units are discovered, you must create a new extension with the new discovery port and delete the old one. If the units are not automatically discovered, you must add them manually.
- (ACTi) Corresponds to the Search server port 1 in the ACTi video server settings.
- (Bosch) All units that are controlled through the same Bosch extension must be configured with the same discovery port.
- Discovery reply port
- (ACTi and Interlogix) Corresponds to the Search server port 2 in the ACTi video server settings.
- Unicast period
- Time period in which the extension repeats its connection tests using unicast to determine whether each unit is still active in the system.
- Multicast period
- Time period in which the extension attempts to discover new units using multicast. This option can be disabled.
- The IP address that follows is the standard multicast IP address used by Omnicast™. Change the standard multicast IP address only if it is already used for something else.
- Broadcast period
- Time period in which the extension attempts to discover new units using broadcast. This option can be disabled.
- Default logon
- Certain types of units can be protected by a username and a password against illegal
access. The logon credentials can be defined individually for each unit or for all
units using the same extension.
- Certain types of units (such as Axis) require a username.
- Certain types of units (such as Bosch) require only a password.
- Use HTTPS
- Select this option to use Secure Hypertext Transfer Protocol for
added security.NOTE: For Bosch units, this setting only appears when Protocol is set to HTTP. When Use HTTPS is set to On, the Port set here supercedes the Command port.
- TCP notification port
- (Panasonic and Interlogix) Port used by the Archiver role to receive notifications from the units. When an event occurs, such as Signal lost or Signal recovered, the unit initiates a TCP connection with the Archiver and sends the notification through this port.
- Notification channel
- (Interlogix only) When you configure multiple Archiver roles to listen to the same units, such as in a failover list, each Archiver must be identified with a different notification channel (1 to 8). You can ignore this parameter if you are using only one Archiver.
- For multiple Archiver roles, you must follow these rules:
- All Archiver roles that control the same units must be configured with the same TCP notification port.
- All Archiver roles must use a different notification channel.
- Bosch VRM settings
- The VRM settings are exclusive to Bosch VRM (Video Recording Manager). These settings allow you to query and play back video from Bosch cameras that are managed by a Bosch VRM. Multiple Bosch extensions can use the same VRM.
- If you add more than one VRM to the list, you can use the move up () and move down () buttons to move a VRM up or down on the list. By default, the Archiver uses the first VRM on the list for queries and archived video. If the first VRM is not available, the Archiver uses the next VRM on the list.
- Verint specific settings
- The following settings are found only on Verint units.
- Show all available video streams as separate cameras
- (Verint only) Omnicast™ supports encoders that generate multiple video streams from the same video source. When these encoders are discovered, the Archiver creates a video encoder with multiple streaming alternatives.
- Select this option to represent every video stream as a separate camera.NOTE: This option requires a camera connection license for each stream.
- SSL settings
- SSL (Secure Sockets Layer) is a protocol used to protect applications that need to communicate over a network. Security Center supports SSL on all message transmissions between the Archiver and the units, except for video streams because the volume of data is too high. The purpose for using SSL in Security Center is to prevent attacks, not to stop eavesdropping.
- Select Enforce SSL only if SSL must be enforced on all units controlled by this Archiver. If this option is cleared, the Archiver will use SSL only to communicate with the units on which SSL is enabled.
- Advanced settings
- The advanced settings are reserved for use by Genetec™ Technical Assistance Center.
- NTP settings
- Synchronizes the time between the units that support NTP (Network Time Protocol), and the NTP server. Keeping the units’ time synchronized is particularly important for units that handle video archiving.
- You must set the following parameters:
- NTP server
- Specify the NTP server name.
- NTP port
- Specify the NTP server port number.
- Poll timeout
- Specify how often you want the time on the units to be checked to ensure that they are properly synchronized with the NTP server. For example, if 60 seconds is entered, the time is verified every 60 seconds.