Creating Web Client Servers - Security Center 5.7

Security Center Administrator Guide 5.7

Applies to
Security Center 5.7
Last updated
2021-12-16
Content type
Guides > Administrator guides
Language
English (United States)
Product
Security Center
Version
5.7

Create a Web Client Server role to host a Web Client and to define the web address (URL) that users enter in their web browser to access Security Center Web Client.

What you should know

  • If your system will only have a single Web Client Server, then you can create the role using the default settings. However, if you have a complex system involving multiple private networks, you might choose to deploy multiple Web Client Server roles, in which case, you might need to change the default settings of each role.
  • When the Web Client Server role is created, it is deployed to the main Security Center server. If you have multiple Web Client Server roles, move each role to an expansion server so that traffic loads are well distributed.
  • A Media Gateway role is created automatically and hosted on the same Security Center server as the Web Client Server role.
  • If you deploy multiple Web Clients on the same server, make sure the URL of each is unique. Otherwise, the role entity turns yellow and an Entity warning event is generated.
  • If end-users will monitor video in Web Client using Mozilla Firefox or Microsoft Edge browsers, make sure that one of the following conditions is met:
    • A valid SSL certificate is installed on the Web Client Server.
    • If using the default self-signed SSL certificate, make sure that the REST ports on the Media Gateway role and the Web Client Server port settings match; the defaults are port 80 for HTTP and port 443 for HTTPS.

Procedure

  1. From the Config Tool home page, open the System task, and click the Roles view.
  2. Click Add an entity (), and then click Web Client Server ().
  3. (Optional) Set Unlimited session time to ON so that users remain logged on to Web Client as long as they keep their browser window open.
    Set Unlimited session time to OFF so that users are automatically signed out of Web Client after 12 hours of inactivity.
  4. On the Basic information page, enter a name and description for the role.
  5. Select the Partition this role is a member of, and click Next.

    Only users that are members of the partition can view or modify those entities.

  6. Click Next > Create > Close.

    The new Web Client Server role is created.

  7. In the Web Client Server page, click the Properties tab.
  8. If you have multiple Web Client Server roles, verify that the default URL under Communications settings does not match the URL of other Web Client Servers in your system. If it does, change the web address and/or the port settings so that the URL of this Web Client is unique.
    The default URL of a Web Client is https://host:443/SecurityCenter, where host is the IP address or computer host name of the server that hosts the Web Client Server.
  9. Click Apply.

After you finish

  • If this is one of many Web Client Server roles, move the role to its own server.
  • To configure failover for this role, add a standby server.
  • If the default port settings conflict with other applications on your system, you can change the ports used by Web Client and the Media Gateway. In the Web Client Server role, On the Properties page, slide the Use the default web ports of the server slider to OFF, then change the HTTP and HTTPS ports. The default settings are HTTP port 80 and HTTPS port 443. Click Apply to save your changes. Then make the same changes to the REST port settings in the Media Gateway role.