Failover is configured on Archiver for body-worn cameras - Security Center 5.7

Security Center Administrator Guide 5.7

Applies to
Security Center 5.7
Last updated
Content type
Guides > Administrator guides
English (United States)
Security Center

Failover cannot be configured on the Archiver role when it is used by a Wearable Camera Manager role.


Failover and redundant archiving are not supported on Archiver roles used for wearable (or body-worn) cameras.

Solution 1

Change the default Archiver assigned to the Wearable Camera Manager to one that does not have failover configured.
Best Practice: We recommend using a dedicated Archiver for wearable cameras.
  1. In the Config Tool home page, open the Video task and select the Wearable Camera Manager role.
  2. Click the Properties tab and click Show advanced settings.

  3. From the Default archiver drop-down list, select an Archiver that does not have failover configured.
  4. Select or enter the port that you require.
  5. Click Apply.
    IMPORTANT: You must generate new configuration files for your camera stations after changing these settings. See Configuration file errors for body-worn cameras.

Solution 2

Assign a different Archiver to the wearable camera user in the Area view task.
  1. In Config Tool, open the Area view task.

  2. Select a wearable camera user () and click the Properties tab.
  3. Under Advanced settings, select the Archiver and the Linked camera from their respective drop-down lists.
  4. Click Apply.