The PTZ widget is used to perform pan, tilt, and zoom operations on the displayed camera. It appears in the dashboard when the selected tile displays a PTZ-enabled camera ().
IMPORTANT: Not all PTZ cameras support all PTZ commands. If one or more of the PTZ buttons are greyed out, the PTZ camera you are working with does not support that command.
|A||Direction arrows||Pan the PTZ motor using the eight direction arrows.|
|B||Speed slider||Adjust the speed of the PTZ motor.|
|C||Zoom in/out||Zoom in and out using the plus (+) and minus (-) commands.|
|D||Quick access buttons||Move the PTZ motor to one of the eight quick access PTZ presets.|
|E||Presets||Select a preset from the drop-down list to move the PTZ motor to that preset, save a new preset position, or rename the preset.|
|F||Patterns||Select a PTZ pattern from the drop-down list to start a PTZ pattern (series of presets or recorded PTZ movements), record a new pattern, or rename the pattern.|
|G||Auxiliaries||Select an auxiliary from the drop-down list to start or stop an auxiliary command, or rename the auxiliary command.|
|Lock PTZ||Lock the PTZ motor so only you have control of the PTZ.|
|Toggle to advanced mode||Open the PTZ Advanced mode menu.|
|Focus near||Focus the PTZ near.|
|Focus far||Focus the PTZ far.|
|Open iris||Manually control the iris (open iris).|
|Close iris||Manually control the iris (close iris).|
|PTZ home||Go to the PTZ home (default) position.|
|Flip||Flip the PTZ motor 180 degrees.|
|Menu on/off||Open the PTZ menu. This option is only for analog PTZ cameras.|
|Specific commands||Use commands that are specific to that camera model.|
|Go to preset||
Jump to the preset position selected in the drop-down list.
Start the PTZ pattern selected in the drop-down list. You can click any preset of PTZ button to stop the pattern.
|Start auxiliary command||Start a PTZ auxiliary command (for example, a wiper blade).|
|Stop auxiliary command||Stop the PTZ auxiliary command.|
|Rename||Rename the selected preset, pattern, or auxiliary.|