Configuring advanced permit settings - Security Center 5.9

Security Center Administrator Guide 5.9

Applies to
Security Center 5.9
Last updated
2022-10-25
Content type
Guides > Administrator guides
Language
English
Product
Security Center
Version
5.9

The Advanced tab is where you configure the advanced properties of the permit such as the color and download frequency. These properties are not required for all permits, but allow you to customize certain permits for specific scenarios.

Before you begin

Create the permit.

Procedure

  1. From the Config Tool home page, click ALPR > Permits, and select the permit you want to configure.
  2. Click the Advanced tab.
  3. Beside Color, click the colored block and use the Select color dialog box to assign a new color to the permit.
    The map symbol that marks the location of the permit hit in Security Desk and Genetec Patroller™ will appear in that color, as well as the Permit Hit and Review Hits screen in Genetec Patroller™.
  4. Turn on Disable periodic transfer if you only want permit changes to be downloaded to Genetec Patroller™ when the user logs on to the application. This option requires a wireless connection between Genetec Patroller™ and Security Center.
  5. Turn on Enable transfer modification if you want to transfer permit modifications to Genetec Patroller™ as soon as they occur. For example, you can use this option on a permit to force Genetec Patroller™ to query for changes more frequently than the periodic transfer period (which applies to all permits). This option requires a continuous wireless connection between Genetec Patroller™ and Security Center.
  6. Click Apply.