Defining weekly schedules - Security Center 5.9

Security Center Administrator Guide 5.9

Applies to
Security Center 5.9
Last updated
2022-09-12
Content type
Guides > Administrator guides
Language
English (United States)
Product
Security Center
Version
5.9

To define a set of time constraints for situations that occur weekly, you can define weekly schedules and then apply them to entities.

What you should know

Time ranges are shown as colored blocks on a time grid. Each block represents 30 minutes. When you click and hold your left mouse button, a pop-up window opens. Each block on the grid represents one minute.

Procedure

  1. Open the System task, and click the Schedules view.
  2. Click Schedule (), type a name for the schedule, and then press ENTER.
  3. In the Identity tab, enter basic properties of the schedule, and then click Apply.
  4. Click the Properties tab.
  5. From the Date coverage drop-down list, select Weekly.
  6. Using the time grid, set the time coverage as follows:
    • To select blocks of time, left-click your mouse.
    • To remove blocks of time, right-click your mouse.
    • To select or remove a successive block of time, click and drag your mouse.
    • To zoom in on the time grid and select specific minutes, click and hold your left mouse button.
  7. Click Apply.

Example

The following example shows a weekly schedule from 9 a.m. to 5 p.m., from Monday to Friday, with a half-hour break between 12:00 p.m. and 12:30 p.m.