Adding Sierra routers as GPS data sources - Security Center Fleet Monitoring 2.2

Before you can monitor GPS units in Security Center, you must add them to the plugin role. You can add GPS unit entities to Security Center using a Sierra router as a push data source.

1. From the Config Tool home page, open the Area view task.
2. Click Add an entity and select GPS unit.
3. From the Model list, select Data source, and enter an entity Name.
4. Click the Properties tab. In the Data source section, enter a unique identifier for the data source.
   This identified is prefixed to each NMEA sentence sent from the router. If the router cannot prefix a unique identifier to the NMEA sentence, use the IP address of the router.
5. From the router's configuration web page, select the GPS tab, and ensure that Enable is selected.
6. In the GPS Sources section, ensure that Built-in GPS is selected.
7. In the NMEA messaging section under Local, ensure that Broadcast LAN is selected, and that the Port matches what you configured in the Vehicle Monitoring plugin.
8. Click Submit.