Using geofenced areas of interest, you can automatically monitor movement, trigger events, and generate reports based on the entry and exit of AVL units from specific areas. If you do not have specific areas of interest to monitor, then you do not need to configure these settings.
Before you begin
- Create an AVL unit entity.
- Create a map area. For instructions, refer to the Security Center Administrator Guide.
What you should know
Procedure
-
For the Receive events for option, select one of the
following:
-
All areas: All area entities are geofenced areas
of interest.
- Use speed threshold
- Activate this setting to trigger an event when the associated vehicle is in any area of interest and exceeds the defined speed threshold.
- Speed threshold
- The speed threshold that, when exceeded by the associated vehicle in any area of interest, triggers an event.
- ALPR filters
- (Optional) Choose to apply ALPR filters to classify the area of interest as a bus lane or bus stop. This setting is used to determine which zone of the ALPR camera is used to detect license plates while in the geofence.
-
Specific areas: Only selected area entities are
geofenced areas of interest.NOTE: If you selected Specific areas, click
to add one or more areas
to the Areas of interest list. - No areas: No area entities are geofenced areas of interest.
-
All areas: All area entities are geofenced areas
of interest.