Using the LPM protocol to connect SharpZ3 units with Security Center (Basic) - The License Plate Management (LPM) protocol provides a SharpZ3 unit with a secure and reliable connection to Security Center. When The LPM protocol is enabled on a SharpZ3 unit, the protocol manages the camera’s connection to the ALPR Manager role. - Security Center 5.12

The License Plate Management (LPM) protocol provides a SharpZ3 unit with a secure and reliable connection to Security Center. When The LPM protocol is enabled on a SharpZ3 unit, the protocol manages the camera’s connection to the ALPR Manager role.

1. From the Config Tool homepage, click the ALPR task and select Roles and units.
2. Select the ALPR Manager role from the drop-down list.
3. Expand the list of cameras under the ALPR Manager and select the SharpZ3 unit.
4. At the bottom of the screen, click Unit and select Upgrade to LPM protocol ().
   The Upgrade to LPM Protocol window opens.
5. Enter a Name for the camera.
6. Enter the IPv4 or IPv6 IP address of the camera.
7. Enter the Port of the camera. Use port 443 for HTTPS communication.
   NOTE: Avoid entering port 8001, as it refers to the legacy connectivity port. If you connect to this port, Sharp units cannot use the LPM protocol and fall back to the less-secure legacy protocol.
8. From the Location list, assign the camera to an area entity.
   
9. Click Next.
10. Enter the Username and Password used to log on to the Sharp Portal and click Next.
11. Review the settings and click Create.