Enabling the LPR Manager after an upgrade - Security Center 5.8 GA

Security Center Installation and Upgrade Guide 5.8 GA
Applies to
Security Center 5.8 GA
Last updated
2019-09-27
Content type
Guides
Guides > Installation guides
Language
English
Product
Security Center
Version
5.8

To enable an LPR Manager that is in the warning state (yellow) after an upgrade, you must assign an Archiver role to it.

Before you begin

Do the following:

What you should know

After upgrading the LPR Manager from 5.5 or earlier to 5.8, the LPR Manager continues to manage the image data that were collected before the upgrade. Only the new image data are managed by the Archiver. The old image data remain in the LPR Manager database for as long as their retention period specifies, and then they are deleted. Deleting the old image data frees up space in the LPR Manager database for new LPR metadata, but the database file will not shrink in size.

Procedure

  1. From the Config Tool home page, click System > Roles.
  2. Click the LPR Manager that is in the warning state, and click Resources.
  3. Click Images saved to, and select the Archiver role you created earlier.
  4. Click OK > Apply.