The following software issues were resolved in Security Center 5.11.1.0.
Solution/Unit | Issue | Description |
---|---|---|
Access | 3167438 | When a zone with an HID unit has no associated events configured for normal operations, the zone might display in red with a zone state is unknown warning message after an Access Manager restart. |
Access | 3164628 | Running the Mobile Credential Manager role in backward compatibility mode with Security Center 5.5 or earlier, clicking the Synchronization button on the Credentials page in Config Tool freezes the application. |
Access | 3139805 | Users assigned the Provisioning privilege template might not be able to delete custom cardholders, credentials, or cardholder groups and receive an insufficient privilege error message. |
All | 3225697 | The Archiver role might display a yellow warning with an Attempt to register agent failed error message when the main server reboots after failover. |
All | 3191143 | Under specific user group configuration, users that have inherited the Modify User Properties privilege from a user group can edit other users of a higher privileged user group. |
All | 3188222 | When generating cardholder reports with a large quantity of cardholder entities, the report execution might time out. |
All | 3178757 | The Logon supervisor of setting is unavailable for Active Directory users. |
All | 3178262 | If a federated alarm is triggered while the Federation™ role is offline, the Alarm report shows the Federation™ role as the source of the alarm instead of the actual source. |
All | 3169508 | When removing a Federated event in the properties tab, the audit trail might contain duplicates. |
All | 3168627 | A high influx of camera events from federated systems might result in high memory consumption on the Federation™ role process, potentially leading to a service failure. |
All | 3168057 | When adding a user group to an Authentication role, the option to add an email address to that user group in the User Management task is grayed out. |
All | 3140246 | In Security Desk, when a user with the Delete Credentials privilege tries to delete a cardholder, a credential or a group cardholder with a custom field, it fails. |
All | 3139789 | In Config Tool, the Copy Config Tool might fail for users that have partition access rights inherited from user groups. |
All | 3104548 | The option to limit concurrent logons in the User Management task might be incorrectly enforced when the system is configured with multiple Directory servers. |
All | 3101545 | When logging in to Security Desk using Active Directory Federation Service (ADFS), relaunching the application opens the ADFS login page instead of the Security Desk login page. |
All | 3092946 | Logging out of Security Desk needlessly registers a task removed item in the Audit trails for each active task. |
All | 3055830 | In Security Desk, the Role and Hardware status widgets might not display the same system issues when they should. |
All | 3015603 | In Config Tool, there is no indication that the Federation™ might display a yellow Synchronization in process warning message indefinitely. |
ALPR | 3255520 | The hostname field in the SFTP connection section does not allow for a hostname longer than 50 characters. |
ALPR | 3206647 | When using RabbitMQ to process large amounts of data, if the endpoint fails, it might cause the system to fail. |
ALPR | 3169003 | Unable to add ALPR unit with the Powershell module using the LPM protocol in Security Center 5.11. |
ALPR | 3092994 | The Rule column is empty in the Reads report for reads that generated a hit off a permit. |
ALPR | 3080756 | Importing geometric shapes created using an ArcGIS software into a Reads report results in a No polygon found error message. |
ALPR | 3080756 | Importing geometric shapes created using an ArcGIS software into a Reads report results in a No polygon found error message. |
ALPR | 3079655 | When performing a Unit replacement of a SharpVG3, the new unit does not automatically reconnect after the swap. |
ALPR | 3079602 | When adding a SharpVG3 video unit in Security Center using its IPv6 address, the enrollment fails with a Unit creation failed: Failed to register public key for Sharp error message. |
ALPR | 3023539 | When performing a firmware upgrade on a Sharp camera from the Inventory task, there is no button to cancel the upgrade. |
ALPR | 2230351 | Exporting an Inventory report with high-resolution images as a PDF fails with An error occurred during local report processing error message. |
Video | 3281309 | In Security Desk, searching for video in the Archives task or the Go to specific time option in the Camera widget does not show all video entries for the configured archive retention period. This prevents playback of older videos. |
Video | 3207399 | In Config Tool, the Archiver role might display a Media router connection lost warning when there are no issues. |
Video | 3180320 | The default value for the User Assistant role endpoint is now 127.0.0.1. |
Video | 3180178 | Unit replacement on a system with Cloud storage activated might fail with an unexpected error. |
Video | 3180020 | In Security Desk, the Export video button is unavailable in the Archiver Storage Details task. |
Video | 3177951 | SDK users with PTZ privileges cannot move federated PTZ cameras to a preset position if their Perform basic operations privilege is set to Undefined. |
Video | 3176598 | When trying to stream live videos and playback from the Cloud SaaS, the Media Router fails. |
Video | 3140393 | Disabling the Export/Trickling feature in the redirection strategy for a NIC card does not prevent an Archiver transfer. |
Video | 3139364 | When the Archiver role loses connection to the Directory, it does not fail over, showing a continuous Attempt to register agent failed/Agent already registered to an Archiver error, resulting in a loss of live video. |
Video | 3138990 | Dewarping video from a Pelco camera using the Genetec™ Video Player does not completely dewarp the image. |
Video | 3138831 | In Security Desk, Object Detected events from a Hanwha AI camera can be received inside Monitoring task but do not show up when running a Camera Events report. |
Video | 3113564 / 3148637 | Dewarping video does not work for Bosch fisheye cameras in Security Desk and the standalone Genetec™ Video Player versions 5.10.2 and later. |
Video | 3101566 | Security Desk might be unresponsive during high-performance operations in a system with dual NVIDIA graphics cards. |
Video | 3099827 | When deleting and re-adding a video unit in Config Tool, events are no longer saved for that unit. |
Video | 3092090 | When deleting a camera with bookmarks from the Auxiliary Archiver, the bookmarks are not deleted, and might result in a ghost camera. |
Video | 3087067 | Image rotation is not applied during video playback for Bosch cameras. |
Video | 3069551 | In Security Desk, the Camera Configuration report now displays missing camera configuration information. |
Video | 3023731 | GPU percentage shows different information between the system window and the Hardware Information. |
Web Client | 3168358 | When canceling the export of a video in G64x format using the SDK, the configured deleteExportedFiles parameter is not respected resulting in the deletion of the file. |
Web Client | 3167555 | Enabling EnforceStrictCrossOrigin in the Mediagateway.gconfig prevents the Genetec™ Web Player from connecting to the Media Gateway. |