Silencing door events - Security Center 5.11

To stop temporarily receiving certain types of door events, you can shunt the inputs on the access control unit that are used to detect these door events.

To silence door events:

1. From the Monitoring task, select a tile that is displaying a door.
   The Door widget is displayed in the Controls pane.
2. In the door widget, click Input () and select one of the following commands:

   Shunt all inputs

   Silence all door events detected through inputs.

   Shunt door sensors

   Silence events such as Door closed, Door forced open, Door opened, and Door open too long.

   Shunt entry sensors

   Silence events such as Entry detected and No entry detected.

   Shunt lock sensors

   Silence events such as Door secured and Door unsecured.

   Shunt manual stations

   Silence events such as Manual station activated and Manual station reverted to normal state.

   Shunt request-to-exit inputs

   Silence events such as Request to exit and Request to exit normal.

   In the area view, the door icon and name turn yellow, meaning the door is in a warning state. A blue label Inputs shunted appears in the Door widget. Clicking this label shows which inputs are shunted in an info bubble.

   

To re-enable door events:

1. Click Input () again and select the Unshunt command that corresponds to the events that you want to enable.