Before you can monitor events in the Monitoring task, you must select the entities that trigger those events.
Before you begin
What you should know
To monitor events, it is important to select which entities you want to monitor, because some event types can be generated by multiple entities. For example, an Access granted event can be generated by a cardholder, visitor, or credential. If you only monitor cardholders, you will not receive all Access granted events.
- From the home page, click .
(Optional) To give the tab a unique name, right-click the tab, click
Rename task; in the Task name
box, type a name, then click Rename.
You can rename the tab to indicate what is being monitored; for example, Monitoring camera events. This is helpful when you have multiple monitoring tabs open at the same time.
In the area view, select the entities you want to monitor (specific cameras,
doors, cardholder, patrol vehicles, fixed AutoVu™
Sharp cameras, hotlists, and so
To select multiple entities, hold Ctrl or Shift, and then select the entities.
Drag the selected entities over the Monitoring () icon at the bottom of the Monitoring task.
The entities you selected are added to the Event monitoring list.NOTE: By default, all tiles are armed to monitor events. You can arm and disarm all tiles at any time by clicking . When a tile is armed to monitor events the tile ID background is blue.
(Optional) To add more entities from the Event monitoring
dialog box, do the following:
- Click Monitoring (), and then under Event monitoring click Add ().
Select the entity type you want to monitor (area view, cardholder,
cardholder group, visitor, hotlist, permit, user, asset, and so
Tip: Certain entity types, such as areas, doors, elevators, zones, and so on, only appear in the area view drop-down list.
- Select the entities you want to monitor (specific cameras, doors, cardholder, patrol vehicles, fixed AutoVu™ Sharp cameras, hotlists, and so on).
To add a conditional filter, select an entity from the
For drop-down list.
You can monitor events for a cardholder group at a specific door.NOTE: Only events that are related to the cardholder group and the door are monitored. You will not receive other events for the door unless you are also monitoring that door.
- Click Add.
(Optional) In the Tile column of the Event
monitoring list, select a tile to display the entity in.
You can associate more than one entity to the same tile. By default, events are displayed in any tile (All).You can set Tile 1 to display events happening at the Main Entrance door.
Monitoring is turned on in the canvas tiles. When a new event occurs, Security Desk displays the event in an empty tile. When there are no more empty tiles, the entity that has been displayed for the longest time is replaced by the new event.