Configuring Pelco Panomersive camera lenses - Security Center 5.10.1.0

Security Center Video Unit Configuration Guide 5.10.1.0

Applies to
Security Center 5.10.1.0
Last updated
2021-10-18
Content type
Guides > User guides
Language
English
Product
Security Center
Version
5.10

To view and dewarp video images in Security Desk that were captured using a Pelco Panomersive lens, you must configure the lens in Config Tool.

What you should know

  • To dewarp images from a Pelco Optera IMM unit, your Graphics processing unit (GPU) must support OpenGL 2.0.
    IMPORTANT: Windows Remote Desktop downgrades the graphics on the remote host machine to OpenGL 1.1. Therefore, dewarping images does not work using Remote Desktop.
  • Panomersive H.264 or Panomersive Unistream modes must be configured on the webpage to get the digital zoom.
  • Digital zoom is only available for single view mode. One Panorama view is the result of dewarping and cannot provide zoom functionality.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. From the Lens type drop-down list, make sure Pelco is selected.
  4. Click Edit ().
  5. In the Configure lens dialog box, use the Quality field to select whether you want to Optimize performance, or Optimize quality.
    NOTE: It is not possible to configure the camera's position in Config Tool. The sensors must be manually moved on the camera to the desired position.
  6. Click OK > Apply.