Configuring capture resolutions of Panasonic cameras - Security Center 5.10.1.0

Security Center Video Unit Configuration Guide 5.10.1.0

Applies to
Security Center 5.10.1.0
Last updated
2021-10-18
Content type
Guides > User guides
Language
English
Product
Security Center
Version
5.10

For Panasonic megapixel cameras (for example, 1.3 megapixels or 3.0 megapixels) to stream at the correct resolution, you must configure the image capture mode on the unit’s web page before adding the unit in Security Center.

What you should know

Configuring the capture mode is especially important if you want to use a higher resolution, because the default image capture mode is usually 30fps.

Procedure

  1. Open the unit's web page.
  2. Click Setup > Image.
  3. From the Image capture mode drop-down list, select the desired resolution.
    NOTE: On some models you may have to select an Aspect ratio instead of an Image capture mode.
  4. Click Set.