Enabling audio out buffering for Verint units - Security Center 5.10.1.0

Security Center Video Unit Configuration Guide 5.10.1.0
Product
Security Center
Content type
Guides > User guides
Version
5.10
Release
5.10.1.0
Language
English
Last updated
2021-10-18

To use the audio out anti-jitter buffer feature with your Verint units in Security Center, you must activate the AudioOutDelay advanced setting for the Archiver role.

What you should know

The unit extension can be configured to use the audio out anti-jitter buffer. With this feature enabled, the Archiver buffers the audio packet before sending it to the unit's audio decoder, eliminating any jittering that may occur.

Procedure

  1. From the Video task in Config Tool, select the Archiver to configure.
  2. Click the Resources tab.
  3. At the bottom of the Resources tab, click Advanced settings.
  4. In the Advanced settings dialog box, click Additional settings.
  5. In the Additional settings dialog box, click .
  6. In the Name column, type AudioOutDelay.
  7. In the Value column, type 400.
  8. Click Close.
  9. In the Advanced settings dialog box, click OK > Apply.
  10. When you are asked to restart the Archiver, click Yes.