Upgrading Firmware with Smartviewer AUTO - Security Center 5.10.1.0

Security Center Video Unit Configuration Guide 5.10.1.0

Applies to
Security Center 5.10.1.0
Last updated
2021-10-18
Content type
Guides > User guides
Language
English
Product
Security Center
Version
5.10

After you upgrade Firmware, the device must be rebooted.

Procedure

  1. Make sure you are connected to a device by following: Connecting to a device.
  2. Click System.
  3. Click Information.
  4. On the System tab, click the Upgrade button.
  5. Select the firmware you wish to upload to the device.
  6. Click OK.
  7. Wait for the upgrade to be completed. The device will reboot.

After you finish

If the IP does not display, reboot the SRM. Leave the cameras connected.