Adding the Axis C3003-E network speaker horn - Security Center

Security Center Video Unit Configuration Guide

Security Center
Content type
Guides > User guides
Last updated

The Axis C3003-E network speaker horn is added to Security Center as if it was a video unit with only one speaker. However, it cannot work in Security Desk unless it is attached to a camera.


  1. Open the Video task in Config Tool.
  2. Click Video unit ().
  3. In the Manual add dialog box, select Axis from the Manufacturer drop-down list.
  4. Select C Series from the Product type drop-down list.
  5. Enter the IP address of the Axis C3003-E unit.
  6. Enter the Username and Password of the unit.
  7. Click Add, and then close the dialog box when the unit is added to the system.
  8. In the Video task, select a camera from the list of cameras.
    NOTE: Select a camera other than the Axis C3003-E unit.
  9. Click the Hardware tab.
  10. From the Speaker drop-down list, select the Axis C3003-E to assign the speaker to the camera.
  11. Click Apply.


When the speaker is assigned to the camera, you can drag it to a tile in Security Desk and press the talk button to speak through the speaker.