Configuring date and time on the NVR - Security Center 5.11.0.0

Security Center Video Unit Configuration Guide 5.11.0.0

Product
Security Center
Content type
Guides > User guides
Version
5.11
Release
5.11.0.0
Language
English
Last updated
2022-04-19

You must configure the date and time on the Network Video Recorder (NVR).

Procedure

  1. Make sure you are connected to a device by following: Connecting to a device.
  2. Click System.
  3. Click Date & Time.
  4. Select the Time zone. For example, GMT-00:00 Greenwich Mean Time, without DST.
  5. Configure Daylight Saving Time if necessary.
  6. Set the current date and time.
  7. Click OK.