Basler BIP2 pins are bidirectional; they can be designated as inputs or outputs.
Therefore, before adding Basler BIP2 cameras in Security Center, you must define the pins as inputs or
outputs in the unit’s web page.
What you should know
Basler BIP2 units only support one input pin.
Procedure
-
Open the unit's web page.
-
Click .
-
Click the Digital I/O tab, and then click the I/O
0 (pin 0) tab.
-
From the Direction list, select Input
or Output, depending on how you want the pin to be
configured.
If you want to receive hardware motion detection events in Security Center you need to select
Output for all the pins.
-
Repeat the steps for each available pin.
-
To apply your settings, close the Input/Output section of
the unit's web page.
After you finish
If the unit is already added in Security Center, then restart the unit.