Configuring Intelligent Video Motion Detection (i-VMD) alarms - Security Center 5.11.3.0

To receive I-VMD alarms in Security Center, you must configure the alarms on the unit’s web page.

1. Open the unit’s web page.
2. Click Setup > Alarm.
3. On the Alarm tab, beside VMD function type, select the i-VMD option.
4. Click Set.
5. (Optional) If you are configuring an older Panasonic video unit, do the following:
   • Click the Notification tab.
   • In the Panasonic alarm protocol notification, set the TCP alarm notification and Additional alarm area data (vM/I-VMD) options to On.
6. (Optional) If you are configuring an i-PRO video unit, do the following:
   • Click the Notification tab.
   • In the HTTP alarm notification section, set the TCP alarm notification and AI-VMD alarm area information options to On.
7. Click Set.
8. On the i-VMD tab, set the i-VMD information addition to On and select either Detection program 1 or Detection program 2.
9. Beside Detection mode/area click Setup >> to configure your i-VMD alarms.
   For each area you define, you can select either Intruder, Direction, or Loitering as the Detection mode. For more details, see your i-PRO documentation.
10. (Optional) If you chose Direction, specify a direction from the Direction setup list.
11. (Optional) If you want to receive Scene change alarms, set the Scene change option to On.
12. Click Set.