Enabling SRTP encryption for Hanwha units - Security Center 5.11.3.0

Security Center Video Unit Configuration Guide 5.11.3.0

Product
Security Center
Content type
Guides > User guides
Version
5.11
Release
5.11.3.0
Language
English
Last updated
2024-03-28

SRTP encryption is supported for most Hanwha units. You must be using the correct firmware and have the camera configured for HTTPS.

What you should know

The following connection types are not supported for Hanwha SRTP-ready devices:
  • SRTP over Multicast
  • SRTP with RTSP over HTTPS

Procedure

  1. Add the camera to Security Center.
  2. Turn on Encryption for the camera. You can do this in the advanced settings of the Recording tab of the camera. For more details about enabling encryption, see the Security Center Administrator Guide.
    Tip: To view the status of the encrypted stream, open the Video task and double-click the appropriate camera. The Encrypted field displays the status of the encrypted stream. Click Show diagnostic information to see which connection type is used.
  3. Select a certificate installed on your computer and click OK.