Upgrading firmware with Smartviewer AUTO - Security Center 5.11.3.0

Security Center Video Unit Configuration Guide 5.11.3.0

Product
Security Center
Content type
Guides > User guides
Version
5.11
Release
5.11.3.0
Language
English
Last updated
2024-03-28

After you upgrade firmware, the device must be rebooted.

Procedure

  1. Connect to a device.
  2. Click System.
  3. Click Information.
  4. On the System tab, click Upgrade.
  5. Select the firmware that you wish to upload to the device.
  6. Click OK.
  7. Wait for the upgrade to complete.
    The device reboots.

After you finish

If the IP does not display, reboot the SRM. Leave the cameras connected.