Configuring Euklis fisheye camera lenses - Security Center 5.12.2.0

Security Center Video Unit Configuration Guide 5.12.2.0
Product
Security Center
Content type
Guides > User guides
Version
5.12
Release
5.12.2.0
Language
English
Last updated
2024-06-12

To view and dewarp video images in Security Desk that were captured using a Euklis fisheye camera lens, you must configure the lens in Config Tool.

Before you begin

If necessary, select a fisheye view on the unit's web page. The default fisheye view is usually adequate. For details about the fisheye views available for your unit, see your Euklis documentation.

What you should know

Using the dewarping feature, you can zoom in on a 360-degree image, similar to the digital zoom feature in Security Desk. The zoomed image is dewarped, or flattened to show a rectangular image.

Procedure

  1. Make sure that basic authentication is enabled in the Unit enrollment tool, as follows:
    1. From the Config Tool homepage, click Tools > Unit enrollment.
    2. In the Unit enrollment dialog box, click Settings and manufacturers ().
    3. Switch the Refuse basic authentication option to OFF and click Save.
  2. Add the unit in Security Center.
  3. From the Video task in Config Tool, select the camera to configure.
  4. Click the Hardware tab.
  5. From the Lens type drop-down list, select GSG Euklis Fisheye.
  6. Click Edit ().
  7. In the Configure lens dialog box, click Get camera parameters.
  8. Select a Camera position.
  9. Click OK > Apply.