Configuring Hanwha Techwin fisheye camera lenses - Security Center 5.12.2.0

Security Center Video Unit Configuration Guide 5.12.2.0
Product
Security Center
Content type
Guides > User guides
Version
5.12
Release
5.12.2.0
Language
English
Last updated
2024-06-12

To view video from a Hanwha Techwin 360° fisheye camera lens in Security Desk, you must first configure the lens in Config Tool.

Before you begin

To use a panomorph lens on cameras that were added to your system before Security Center 5.5 SR4, remove the camera and then add it back again.

What you should know

Dewarping allows you to zoom in on a 360° image, similar to the digital zoom feature in Security Desk. The zoomed image is dewarped, or flattened to show a rectangular image.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. From the Lens type list, select Panomorph.
  4. Click Edit ().
  5. In the Configure lens dialog box, do the following:
    1. Select the Camera position.
    2. Select the Panomorph Lens Type (RPL).
      The panomorph lens type is supplied from the manufacturer with the unit.
  6. Under Manual calibration, click Calibrate.
  7. Click OK > Apply.