Configuring a WV-CU980 Ethernet keyboard - Security Center 5.12.2.0

Security Center Video Unit Configuration Guide 5.12.2.0
Product
Security Center
Content type
Guides > User guides
Version
5.12
Release
5.12.2.0
ft:locale
en-US
Last updated
2024-06-12

You must configure a WV-CU980 ethernet keyboard before using it in Security Desk.

Procedure

To configure a WV-CU980 Ethernet keyboard:

  1. Plug the controller into a power source.
  2. Press the MENU button.
  3. Press twice.
    the LCD displays the Network Setup.
  4. Press CAM (SET) twice.
  5. Enter the device IP address by pressing CAM (SET) after each digit.
  6. Press .
    The Subnet Mask is displayed.
  7. Enter device subnet by pressing CAM (SET) after each digit.
  8. Press .
    The Gateway is displayed.
  9. Enter the gateway address by pressing CAM (SET) after each digit.
  10. Press .
    The Server IP Address is displayed.
  11. Enter the Security Desk IP address by pressing CAM (SET) after each digit.
  12. Press .
    The Communicat Mode displays.
  13. Select CU950 compatible by pressing CAM (SET), and then .
  14. Press .
  15. Press EXIT.

To enable auto login:

  1. Press the MENU button.
  2. Press three times and the LCD will display the Auto Login Setup.
  3. Press CAM (SET) twice.
  4. Press until the LCD displays Login Admin.
  5. Press CAM (SET) twice to confirm your settings.