Configuring capture resolutions of i-PRO cameras - Security Center 5.12.2.0

Security Center Video Unit Configuration Guide 5.12.2.0

Product
Security Center
Content type
Guides > User guides
Version
5.12
Release
5.12.2.0
Language
English
Last updated
2024-06-12

For i-PRO megapixel cameras to stream at the correct resolution, you must configure the image capture mode on the unit’s web page, and then add the unit in Security Center.

What you should know

Configuring the capture mode is important if you want to use a higher resolution, because the default image capture mode is usually 30fps.

Procedure

  1. Open the unit's web page.
  2. Click Setup > Image.
  3. From the Image capture mode list, select the desired resolution.
    NOTE: For some unit models, you must select an Aspect ratio instead of an Image capture mode.
  4. Click Set.