Configuring i-PRO fisheye camera lenses - Security Center 5.12.2.0

Security Center Video Unit Configuration Guide 5.12.2.0
Product
Security Center
Content type
Guides > User guides
Version
5.12
Release
5.12.2.0
Language
English
Last updated
2024-06-12

To view and dewarp video images from an i-PRO fisheye camera lens, you must select a fisheye mode from the unit's web page and then configure the lens in Config Tool.

What you should know

Using the dewarping, you can zoom in on a 360-degree image, similar to the digital zoom feature in Security Desk. The zoomed image is dewarped, or flattened to show a rectangular image.

Procedure

  1. Open the unit's web page.
  2. Click Setup > Image/Audio.
  3. From the Image capture mode list, select the desired fisheye mode and click Set.
  4. Add the unit in Security Center.
  5. From the Video task in Config Tool, select the camera to configure.
  6. Click the Hardware tab.
  7. From the Lens type list, make sure i-PRO/Panasonic is selected.
  8. Click Edit ().
  9. In the Configure lens dialog box, select the Camera position.
  10. Click OK > Apply.