To configure the video resolution for Bosch H.264 units with firmware 4.50 and later,
you must first select a base operation mode.
What you should know
If the unit has two H.264 video streams, the settings for stream2 are limited to the
settings specified for stream1.
Procedure
-
From the Video task in Config Tool, select the camera to
configure.
-
Click the Hardware tab.
-
From the Video Mode list, select a base operation
mode.
Depending on the base operation mode you choose, the available resolutions and
video quality settings for the two H.264 streams change. For example, to enable a
video frame rate of 60 frames per second, select 1:720p 60fps,
2:Copy.
-
Click Apply.
-
Click the Video tab.
-
From the Resolution list, select the desired
resolution.
-
Click Apply.