If you are unable to lower the sensitivity of the Axis P1428-E camera to get a
reliable motion detection performed by the Archiver on its H.264 video stream, you can lower
the value of the Vectors weight in the Advanced
settings.
What you should know
The Axis P1428-E camera encodes motion vectors differently from most cameras,
causing the Archiver's motion detection algorithm to be hyper-sensitive.
Procedure
-
From the Config Tool homepage,
open the Video task.
-
Select the camera that you want to configure and click the Video
analytics tab.
-
Click Motion detection and Advanced
settings.
NOTE:
Advanced settings are only visible when
Detection is done on: Archiver is
selected.
-
In the H.264 advanced motion detection settings dialog
box, lower the Vectors weight to 1 or 0, and click
OK.
This uses the Archiver's motion detection algorithm to respond to
Sensitivity settings differently.
-
Test the motion detection
with different sensitivity settings until you get satisfactory
results.
-
Click Apply.