Configuring Interlogix Discovery 105-E units - Security Center 5.7 GA

Security Center Video Unit Configuration Guide 5.7 GA

series
Security Center 5.7 GA
revised_modified
2017-10-20
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.7

Before adding Interlogix Discovery 105-E (UVE-101) units in Security Center, you must complete some pre-configuration steps.

Procedure

  1. Open the unit's web page.
  2. Click Administration.
  3. Enter you username and password.
  4. Click Video port format.
  5. Set the Video port format to NTSC M or PAL depending on the camera connected to the encoder.
  6. Click OK.