Configuring Oncam Grandeye fish-eye camera lenses - Security Center 5.7 GA

Security Center Video Unit Configuration Guide 5.7 GA

Applies to
Security Center 5.7 GA
Last updated
Content type
Guides > User guides
English (United States)
Security Center

To view and dewarp video images in Security Desk that were captured using an Oncam Grandeye 360 degree fish-eye camera lens, you must configure the lens in Config Tool.

What you should know

Dewarping allows you to zoom in on a 360 degree image, similar to the digital zoom feature in Security Desk. The zoomed image is dewarped, or flattened to show a rectangular image.


  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. From the Lens type drop-down list, select Oncam Grandeye.
  4. Click Edit ().
  5. In the Configure lens dialog box, do the following:
    1. Select the Quality and Camera position.
    2. To set the center position of the fish-eye, drag the left mouse button.
    3. To adjust the radius of the fish-eye, drag the right mouse button.
      NOTE: The blue region represents the area that can be dewarped in a Security Desk tile.
  6. Click OK > Apply.

After you finish

For your changes to take effect, remove the camera from all Security Desk tiles, and then re-add the camera.