Configuring VIQS for Panasonic units - Security Center 5.7 GA

Security Center Video Unit Configuration Guide 5.7 GA

series
Security Center 5.7 GA
revised_modified
2017-10-20
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.7

To use Variable Image Quality on Specified areas (VIQS) with some Panasonic units in Security Center, the feature must be configured in Config Tool.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. Set H.264 VIQS to ON.
  4. Next to the H.264 VIQS setting, click VIQS window.
  5. To re-size the camera view area, do one of the following:
    • In the Size and position section, enter the X, Y, W, and H coordinates.

      X is the Top-left pixel, Y is the Bottom-left pixel, W is the Top-right pixel, and H is the Bottom-right pixel.

    • Drag the green zone to the size you want.
  6. Click OK.
  7. Select ON beside Stream 1 and/or Stream 2 to apply the new VIQS area.