Configuring dewarping for Axis M3007 and M3027 units - Security Center 5.7 GA

Security Center Video Unit Configuration Guide 5.7 GA

Applies to
Security Center 5.7 GA
Last updated
2017-10-20
Content type
Guides
Guides > User guides
Language
English (United States)
Product line
Security Center unified platform > Security Center
Version
5.7

To view and dewarp video images in Security Desk that were captured from an Axis M3007 or M3027 unit, you must configure the lens in Config Tool.

Before you begin

  • Axis M3007 and M3027 units display eight encoders by default. The only stream that can be dewarped is the Overview stream (first encoder). For optimal performance (12 fps), it is recommended to do one of the following:
  • You must have a video card that has Pixel Shader 2.0a and that is compatible with DirectX 9.0.

What you should know

Dewarping allows you to zoom in on a 360 degree image, similar to the digital zoom feature in Security Desk. The zoomed image is dewarped, or flattened to show a rectangular image.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. From the Lens type drop-down list, select Axis.
  4. Click Edit ().
  5. In the Configure lens dialog box, select the Camera position.
  6. Click OK > Apply.

After you finish

For your changes to take effect, remove the camera from all Security Desk tiles, and then re-add the camera.