Enabling 60 fps for Sony 6th generation units - Security Center 5.7 GA

Security Center Video Unit Configuration Guide 5.7 GA
Applies to
Security Center 5.7 GA
Last updated
2017-10-20
Content type
Guides
Guides > User guides
Language
English (United States)
Product
Security Center
Version
5.7

For Sony 6th generation units to stream at 60 frames per second in Security Center, additional configuration steps are required in Config Tool.

Procedure

  1. From the Video task in Config Tool, select the camera to configure.
  2. Click the Hardware tab.
  3. Select the Wide dynamic range option.
  4. From the Mode drop-down list, select High frame rate.
  5. Click Apply.

Results

When you set the Mode to High frame rate, the Wide dynamic range level on the unit is decreased, because streaming at a high framerate such as 60 fps requires a low Wide dynamic range level. The Wide dynamic range level is set on the unit’s web page under Settings > System > Installation.