Enabling audio out buffering for Sony units - Security Center 5.7 GA

Security Center Video Unit Configuration Guide 5.7 GA

series
Security Center 5.7 GA
revised_modified
2017-10-20
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.7

To use the audio out anti-jitter buffer feature with your units in Security Center, you must activate the AudioOutDelay advanced setting for the Archiver.

What you should know

The unit extension can be configured to use the audio out anti-jitter buffer. With this feature enabled, the Archiver buffers the audio packet before sending it to the unit's audio decoder, eliminating any jittering that may occur.

Procedure

  1. From the Video task in Config Tool, select the Archiver to configure.
  2. Click the Resources tab.
  3. At the bottom of the Resources tab, click Advanced settings.
  4. In the Advanced settings dialog box, click Additional settings.
  5. In the Additional settings dialog box, click .
  6. In the Name column, type AudioOutDelay.
  7. In the Value column, type 400.
  8. Click Close.
  9. In the Advanced settings dialog box, click OK > Apply.
  10. When you are asked to restart the Archiver, click Yes.