Mango DSP input pin wiring - Security Center 5.7 GA

Security Center Video Unit Configuration Guide 5.7 GA

series
Security Center 5.7 GA
revised_modified
2017-10-20
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.7

Input pins on Mango DSP units work with a logical circuit value of 0/1.

Security Center closing and opening events are mapped as follows:
  • To trigger an input pin closing event, the voltage on the pins should be dropped from 5 volts to 0 volts.

    On Pegasus M units, the default value is 1. To change it to 0, short the pins.

  • To trigger an input pin opening event, the voltage on the pins should be raised from 0 volts to 5 volts.

    On Condor VS-8 and VS-16 units, the default value is 0. To change it to 1, apply 5 volts on the pins.

NOTE: The voltage mentioned is approximate, for the exact voltage range; please see the documentation for your Mango DSP unit.