Configuring the Zepcam server and cameras - Security Center 5.7 SR2

Security Center Video Unit Configuration Guide 5.7 SR2

series
Security Center 5.7 SR2
revised_modified
2018-04-04
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.7

The Zepcam server must be installed and the cameras must be configured to connect to the Zepcam server before adding them to Security Center.

What you should know

Zepcam cameras are managed by the Zepcam server. Each camera has a profile with video source configuration. The profile contains the MAC address of the camera.
NOTE: For more information about installing and configuring a Zepcam server, see the Zepcam Server Installation documentation available on the Zepcam website.

Procedure

  1. Download the Zepcam server image ISO file from http://www.zepcam.com.
  2. Restart the system from the ISO file to start the installation.
  3. Configure the IP settings when prompted during installation.
  4. When installation has completed, log on to the Zepcam server.
  5. From the Zepcam server web page, select Settings > Server setup.
  6. Copy and send the License’s System ID to Zepcam to obtain a license.
  7. Click Settings > Create Zepcam Settings File to create a Zepcam configuration file for the cameras that will connect to it.
  8. Enter the required settings so that the cameras can connect to the Zepcam server.
  9. Click Create & Download to complete creation of the Zepcam configuration file.
    NOTE: The file is called settings.zep.
  10. Plug the Zepcam camera to the computer using a USB cable.
  11. Log on to the camera, and then select Administrator Settings > Attach to PC.
  12. Click Select.
    The camera displays Attach to PC (USB Ready).
  13. Transfer the file settings.zep to the camera.
  14. On the camera's menu, click Select.
    The camera displays booting. Then the camera restarts and applies the settings from the file.
  15. Repeat previous using the same settings.zep file for each camera that must connect to the Zepcam server.