Modifying video quality settings for the Traficon VIP-IP unit - Security Center 5.7 SR2

Security Center Video Unit Configuration Guide 5.7 SR2
series
Security Center 5.7 SR2
revised_modified
2018-04-04
category_custom
Guides
Guides > User guides
prodname_custom
Security Center unified platform > Security Center
vrm_version
5.7

If you want to make changes to video settings for a camera attached to a VIP-IP unit, you must first remove it from Security Center and the VIP-IP Traficon Configuration Tool, before making your changes on the unit's web page.

Procedure

  1. From the Video task in Config Tool, remove the VIP-IP unit from Security Center.
  2. In the Traficon Configuration Tool, beside IP Address remove the RTSP video stream IP address.
  3. Open the web page of the camera and modify the desired video settings.
    IMPORTANT: Make sure the frame rate and bit rate is not beyond the capabilities of the VIP-IP unit.
  4. Open the Traficon Configuration Tool and beside IP Address, add the IP address of the RTSP video stream back to the VIP-IP.
  5. Add the VIP-IP unit back to your Security Center system.