Upgrading Firmware with Smartviewer AUTO - Security Center 5.7 SR2

Security Center Video Unit Configuration Guide 5.7 SR2

Applies to
Security Center 5.7 SR2
Last updated
Content type
Guides > User guides
English (United States)

After you upgrade Firmware, the device must be rebooted.


  1. Make sure you are connected to a device by following: Connecting to a device.
  2. Click System.
  3. Click Information.
  4. In the System tab, click the Upgrade button.
  5. Select the firmware you wish to upload to the device.
  6. Click OK.
  7. Wait for the upgrade to be completed. The device will reboot.

After you finish

If the IP does not display, reboot the SRM. Leave the cameras connected.