Adding the Axis C3003-E network speaker horn - Security Center 5.7 SR3

Security Center Video Unit Configuration Guide 5.7 SR3

Applies to
Security Center 5.7 SR3
Last updated
Content type
Guides > User guides
English (United States)
Security Center

The Axis C3003-E network speaker horn is added to Security Center as if it was a video unit with only one speaker. However, it cannot work in Security Desk unless it is attached to a camera.


  1. Open the Video task in Config Tool.
  2. Click Video unit ().
  3. In the Manual add dialog box, select Axis from the Manufacturer drop-down list.
  4. Select C Series from the Product type drop-down list.
  5. Enter the IP address of the Axis C3003-E unit.
  6. Enter the Username and Password of the unit.
  7. Click Add, and then close the dialog box when the unit is added to the system.
  8. In the Video task select a camera from the list of cameras.
    NOTE: You can select any camera that is not the Axis C3003-E unit and to which you want to associate the speaker horn.
  9. Click the Hardware tab.
  10. From the Speaker drop-down list, select the Axis C3003-E to assign the speaker to the camera.
  11. Click Apply.


When you drag the camera that has the speaker assigned to it to a tile in Security Desk, you can press the talk button and speak through the speaker.