Modifying video quality settings for the Traficon VIP-IP unit - Security Center 5.7 SR3

Security Center Video Unit Configuration Guide 5.7 SR3

Applies to
Security Center 5.7 SR3
Last updated
2018-07-20
Content type
Guides
Guides > User guides
Language
English (United States)
Product
Security Center
Version
5.7

If you want to make changes to video settings for a camera attached to a VIP-IP unit, you must first remove it from Security Center and the VIP-IP Traficon Configuration Tool, before making your changes on the unit's web page.

Procedure

  1. From the Video task in Config Tool, remove the VIP-IP unit from Security Center.
  2. In the Traficon Configuration Tool, beside IP Address remove the RTSP video stream IP address.
  3. Open the web page of the camera and modify the desired video settings.
    IMPORTANT: Make sure the frame rate and bit rate is not beyond the capabilities of the VIP-IP unit.
  4. Open the Traficon Configuration Tool and beside IP Address, add the IP address of the RTSP video stream back to the VIP-IP.
  5. Add the VIP-IP unit back to your Security Center system.